/
Both pump head and pump curve are locked

Both pump head and pump curve are locked

Owned by Dennis De Beuckeleer (Unlicensed)
Dec 19, 2022
1 min read

The error message

The parameterisation of the pumps can be done through 2 methods.

  • By filling in the design pump head (which Hysopt will use to calculate a pump curve)

  • By filling in the pump curve (which Hysopt will use to calculate the pump head).

Filling in both pump head/pump curve does not allow Hysopt to perform this calculation, therefore one of the 2 should be unlocked.

 

Related content

Pumps
Pumps
HYSOPT wiki
Read with this
No pumps expected
No pumps expected
HYSOPT wiki
More like this
Pump head not enough for pressure loss
Pump head not enough for pressure loss
HYSOPT wiki
More like this
UA value and primary return/air volume flow are both locked
UA value and primary return/air volume flow are both locked
HYSOPT wiki
More like this
No suitable KVS value found
No suitable KVS value found
HYSOPT wiki
More like this
System check error
System check error
HYSOPT wiki
More like this