System check error

All the errors noted here are related to the system check calculation step and are hence focused on the hydraulic connections of all the base circuits. The faults are often related to the pump and base circuit placement.

• This base circuit is reversed

• Pumps found upstream/downstream of this pump

• Pump found in variable part of dividing circuit

• Pump in variable part of mixing circuit

• No pump to provide flow to the primary side of this hydraulic separator

• Pumps found after ...

• Pump missing on ... / no pumps over ...

• Both of the ... ports should have a pump

• Serial pumps on/after ...

Did you get an error that is not described here or were not helped with this information? Please let us know at support@hysopt.com