Operators
The operators compare different inputs and make calculations based upon them.
Control generator | Name | Description |
|---|---|---|
 | Activator | This BC creates a 1 or 0 based on the relevant input signal. It can be used as a 2-point measuring control strategy for a thermal store. |
 | Comparison | This BC creates a 1 if the input in A is larger than B and a 0 if B is larger than A. |
Difference | This BC is a simple mathematical difference between A and B. | |
Hysteresis and integrator | This BC uses a hysteresis or integrator function on the input signal. | |
Minimum & Maximum | This BC gives either the minimum or the maximum of all the signals connected on the input. | |
Multiply | This BC multiplies all the input signals connected. | |
Negative | This BC makes the signal negative. | |
Piecewise linear function & function expression | This BC uses functions on the input signal, which can be changed to fit the needs of the project. | |
Scaling and truncating | This BC allows for scaling of values. | |
Sum | This base circuits sums all the inputs together. | |
Low pass circuit | The Low pass circuit puts a time delay on a value change. | |
Delay | This BC puts a delay on the signal. This can be used to let a pump run 5 minutes longer for example. | |
Loop Back | This BC is necessary if you want to loop a signal back (in the next timestep) |