/
The volume of the zone is zero
The volume of the zone is zero
- Dennis De Beuckeleer (Unlicensed)
Owned by Dennis De Beuckeleer (Unlicensed)
Dec 19, 2022
1 min read
Analytics
Loading data...
The error message
This error notes toward the volume filled in on the zone. If this is set to 0 (meaning the zone has no volume), adding heat into the volume will cause the temperature to go infinite. This is physically not possible.
To solve this fill in the volume of the room either as an actual volume or as a relative volume-to-power ratio.
, multiple selections available,
Related content
Total losses through windows are larger than design heat load
Total losses through windows are larger than design heat load
More like this
UA value and primary return/air volume flow are both locked
UA value and primary return/air volume flow are both locked
More like this
Control validation
Control validation
More like this
Heat exchanger supply/return temperatures too close together
Heat exchanger supply/return temperatures too close together
More like this