| Title: | Component selection error | |
|---|---|---|
| Owner: | Dennis De Beuckeleer | |
| Creator: | Dennis De Beuckeleer | Nov 24, 2022 |
| Last Changed by: | Bram Van Bogaert | May 22, 2023 |
| Tiny Link: (useful for email) | https://hysopt.atlassian.net/wiki/x/CYA0wQ | |
| Export As: | Word · PDF | |
Hierarchy
Children (14)
Authority smaller than minimal required authority
KVS value et to zero
Fixed pressure drop lower than required pressure drop
Pump head not enough for pressure loss
Total pressure drop larger than 20 bar
No pumps provide pressure for this control valve
Both pump head and pump curve are locked
Design flow rate out of range of pump curve
Heat exchanger supply/return temperatures too close together
No suitable KVS value found
Authority smaller than minimal required authority
KVS value et to zero
Fixed pressure drop lower than required pressure drop
Pump head not enough for pressure loss
Total pressure drop larger than 20 bar
No pumps provide pressure for this control valve
Both pump head and pump curve are locked
Design flow rate out of range of pump curve
Heat exchanger supply/return temperatures too close together
No suitable KVS value found
Labels
There are no labels assigned to this page.
Outgoing Links
