1

Go to the operations menu

2

Make sure auto-connect is on (all the way down in the operations menu)

3

Draw each node individually where you want to connect your pipes to

4

Draw the BCs which you want to automatically connect to the rest of your circuit.

1

Go to the operations menu

2

Make sure auto-connect is on (all the way down in the operations menu)

3

Draw in your model with distribution circuits and end units

4

Go to the zone library end click on ‘Draw zone (D)’. The pointer of your mouse will become a purple circle with the letters ‘ZQ’ next to it.

5

Click on the end units which you want to be connected to a zone. The end unit is automatically connected to a zone with a connected modulating room controller.

6

The end unit is automatically connected to a zone with a connected modulating room controller.

7

You can now do this for all the end units which you want to be assigned to a zone and controller by a controller.

1

Go to the operations menu

2

Make sure auto-connect is on (all the way down in the operations menu)

3

Draw in your model with distribution circuits and end units

4

Go to the controller library and click on the PI controller. The pointer of your mouse will become a PI-controller.

5

Click on the distribution circuits which you want to be controlled by a PI controller.

6

The controller is automatically connected.

7

You can now do this for all the distribution circuits which you want to be controlled by a PI-controller.