Data

Data validation validates if pipe or zone parameters are synchronised.

Error

Inner diameter {diameter} of {diameter name} in Hysopt does not match inner diameter {diameter} of mapped diameter {diameter name} in BIM

Success

Pipe diameter in BIM (Size …) and Hysopt (DN …) are the same

Pipe length in BIM (… m) and Hysopt (… m) are the same

Pipe zeta in BIM (…) and Hysopt (…) are the same

Info

sqdfdf

Warning

Missing diameter mapping for the BIM pipe, map the pipe diameter to enable diameter synchronisation

Missing diameter mapping for the Hysopt pipe, map the pipe diameter to enable diameter synchronisation

Missing diameter mapping for the BIM and Hysopt pipe, map the pipe diameter to enable diameter synchronisation

This BIM Branch contains one or more pipes with a diameter that does not correspond to the predefined ‘segments and sizes’

Fittings are missing required parameters, not possible to calculate and verify zeta values

Pipe contains undefined fittings, not possible to calculate and verify zeta values

Pipe contains fittings for which the type is not present, not possible to calculate and verify zeta values

Pipe contains unknown fittings ({fitting type names}), not possible to calculate and verify zeta values

Hysopt pipe contains nodes for which we could not calculate all necessary info, not possible to calculate and verify zeta values

Could not calculate the zeta values for the fittings

Synchronise to Revit:

Error

Pipe diameter in BIM (Size …) and Hysopt (DN …) are not the same

Synchronise to Hysopt:

Error

Pipe diameter in BIM (size … ) and Hysopt (DN …) are not the same

Pipe length in BIM (… m) and Hysopt (… m) are not the same

Pipe zeta in BIM (…) and Hysopt (…) are not the same

Success

Zone volume in BIM (… m³) and Hysopt (… m³) are the same

Info

sqdfdf

Warning

fdsdg

Synchronise to Revit:

Error

Synchronise to Hysopt:

Error

Zone name in BIM (Space #) and Hysopt (<empty>) are not the same