Your newly created model is opened after following theCreating your first project page. The opened model contains a lot of different buttons and drop-down menus. We will explain all these on this page.
...
1.
...
Tab buttons
These buttons will bring you to the four two different tabs the optimiser Hysopt BIM Syncer contains.
Button logo | Name | ExplanationMore information | |
|---|---|---|---|
 | Designer | This tab lets you work on the models https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089530882/Drawing+your+first+model | |
 | Inspiration library | This tab contains different pre-made and working models that you can insert into your model. This way you don’t have to start drawing your models from scratch. | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089368928/Inspiration+Library+-+Wizard |
 | Sensitivity analysis | Sensitivity analysis is used to thoroughly examine the correct dimensions of the system by simultaneously simulating different models, each having a minor difference from the reference. | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089206234/Sensitivity+Analysis |
 | Pareto | Pareto analysis is used to analyse different concepts or models with each other. The analysation is done by comparing the KPIs (Key Performance Indicators) of every model.Pareto analysis: usage |
2. Log out button
This button lets you log out of the Hysopt optimiser BIM Syncer application.
3. Layers and libraries
These buttons contain all the different libraries you need to make a working model.
Button logo | Name | Explanation | More information |
|---|---|---|---|
 | Heating library | This button contains everything that you need to use for a heating circuit | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089203864/Heating+library |
 | Cooling library | This button contains everything that you need to use for a cooling circuit | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089206007/Cooling+Library |
 | Zones library | This button contains everything that you need to use for drawing the zones of radiators | |
 | Control library | This button contains everything that you need to use for drawing the controls of your model | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089370593/Controls |
 | Text library | This button contains everything that you need to use for drawing text labels | No extra information is available. |
4. Tools
Button logo | Library | Name | Explanation |
|---|---|---|---|
 |  | Select | This is used to select one or multiple items on the drawing canvas. |
 |  | Two pipe | This is used to draw two pipes (supply and return). This is the kind of pipe that you as a user will mostly use. |
 |  | Header | This is used to draw a header. This pipe is used in places where one pipe arrives and multiple pipes leave. |
 |  | Reverse return | The reverse return pipe is used so that the length of the circuit through the supply and return piping to each end unit is essentially the same. Therefore, balancing is almost unnecessary. |
 |  | Changeover | This pipe can be used in a system where both heating and cooling connections are made through the same pipe. |
 |  | Three pipe | This piping offers a significant reduction in installation costs and pipework compared with traditional four-pipe systems. Three-pipe systems can provide full heating and/or cooling to any room at any time. |
 |  | Canvas Link | This is used to draw links between canvasses. This is needed as Hysopt is a 2D -modelling software. |
 |  | Draw zone | This is used to draw zones which you can assign to the Base circuit ‘Radiator/Convector’. A zone is the equivalent of the room where the radiator/convector is located. |
 |  | Assign to zone | Can be used to assign a radiator to a zone. |
 |  | Unassign from zone | This button can be used to unassign a radiator from a zone. |
 |  | Draw | Lets you draw control lines that are used to connect control base circuits or with base circuits. |
 |  | Assign to the electric meter box* | This button can be used to assign an electric consumer to an electric meter box. |
 |  | Unassign from the electric meter box* | This button can be used to unassign an electric consumer from an electric meter box. |
 |  | Assign to fuel meter box* | This button can be used to assign a fuel consumer to a fuel meter box. |
 |  | Unassign from the fuel meter box* | This button can be used to unassign a fuel consumer from a fuel meter box. |
 |  | Insert label | Can be used to create text labels where you can write your comments etc. in. |
 |  | Insert dynamic label | Can be used to create dynamic labels by clicking base circuits while this button is active. |
* More info about the meter boxes is found on the page https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089368564/Meter+boxes
5. Basic Circuit Library
This contains all the different base circuits you might need to draw a model. Base circuits are the building blocks of your model in which you can fill in specific properties of that base circuit. Base circuits can be divided into three major classes, namely production units, end units and in-between units. The illustration below shows a heating circuit on which these classes are indicated.
...
In the table below you find all the BCs of the illustration with the classes and the library where to find them to explain the structure of the basic library. All of the BCs come from the heating library but don’t worry, the cooling library has the same structure.
BC | Location |
|---|---|
 |  |
 | |
 |  |
 |  |
 |  |
 | |
 |  |
 | |
 |  |
 |  |
 |  |
6. File buttons
Button logo | Name | Explanation |
|---|---|---|
 | Open model explorer | The model explorer is used to open/create new models/folders, import models with tokens and move folders and models. |
 | Save model | This is used to save your model. |
 | Copy model | This opens a pop-up screen where you can give your current model another name and another location. This is the same as a ‘save as' function. |
 | Insert model | This can be used to insert another model in your currently opened model. |
 | Export as… | Exports the model as different file types. The possible file types are: JSON, PDF & DXF. More inforamtion about the export possibilities is found on the https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089367755/Exports page. |
7. Model name
This is the name you gave your model during model creation.
8. Compute actions
Button logo | Name | Explanation | More information | ||||
|---|---|---|---|---|---|---|---|
 | System check | 'System check' will check the model for hydraulic mistakes and inconsistencies but this will not check the capacitites. | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089203395/Model+validation | ||||
 | Compute design flows | This action calculates the design flows based on the filled in parameters. | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089367213/Compute+design+flows | ||||
 | Select pipes | This action selects the pipes based on the filled in parameters and filtering criteria. | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089367328/Select+pipes |  | Optimise components | This action optimises the valves and pumpes. | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089367389/Optimize+pumps+and+valves |
 | Simulate | This action requires the use of components in the control library to simulate the dynamic behaviour of the system. | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089367697/Dynamic+simulation |
9. Canvas management, operations and model settings
Button logo | Name | Explanation | |||
|---|---|---|---|---|---|
 | Canvas selection and management |  | Create report | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089367755/Exports | |
 | Search | Can be used to search for components in your model. | |||
 | Operations | Gives a screen of different operations you can use and the shortcuts for these operations. | |||
 | Model settings | This lets you change the units, diversity standard and many more settings of your current model. |
10. User settings & Support buttons
Button logo | Name | Explanation |
|---|---|---|
 | User settings | Lets you change user-specific settings. |
 | Help | Contains a link to the https://hysopt.atlassian.net/wiki/spaces/HRM/overview or lets you contact one of our Hysopt experts. |
11.
...
To prevent the software from becoming too confusing, some buttons or parameters of base circuits are hidden behind layers. Perspectives are used to reveal these hidden layers.
...
Perspective logo
...
Name
...
Explanation
...
Simulation
...
Lets you change user simulation-specific parameters on base circuits. This layer is used to parameterise the dynamic behaviour of the installation.
...
Partial load analysis
...
Lets you analyse the model in partial load. This layer is mostly used to see valve authorities in partial load.
...
Sensitivity Analysis
...
Lets you select certain base circuit settings that you want to change in the sensitivity analysis.
...
Drawing canvas
This is the space where you can draw your model. You can draw models by dragging and dropping base circuits on the canvas and connecting these by pipes and control lines.
12. Zoom in and zoom out
zoom in or out of the Hysopt BIM Syncer user interface