Your newly created model is opened after following theCreating your first project page. The opened model contains a lot of different buttons and drop-down menus. We will explain all these on this page.
...
1.
...
Tab buttons
These buttons will bring you to the four two different tabs the optimiser Hysopt BIM Syncer contains.
Button logo | Name | ExplanationMore information | ||||
|---|---|---|---|---|---|---|
 | Designer | This tab lets you work on the models https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089530882/Drawing+your+first+model | ||||
 | Inspiration library | This tab contains different pre-made and working models that you can insert into your model. This way you don’t have to start drawing your models from scratch. https://hysopt.atlassian. net/wiki/spaces/HRM/pages/3089368928/Inspiration+Library+-+Wizard |  | Sensitivity analysis | Sensitivity analysis is used to thoroughly examine the correct dimensions of the system by simultaneously simulating different models, each having a minor difference from the reference. | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089206234/Sensitivity+Analysis |
 | Pareto | Pareto analysis is used to analyse different concepts or models with each other. The analysation is done by comparing the KPIs (Key Performance Indicators) of every model. |
2. Log out button
This button lets you log out of the Hysopt optimiser BIM Syncer application.
3. Layers and libraries
...
Button logo | Name | Explanation | More information | ||||
|---|---|---|---|---|---|---|---|
 | System check | 'System check' will check the model for hydraulic mistakes and inconsistencies but this will not check the capacitites. | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089203395/Model+validation | ||||
 | Compute design flows | This action calculates the design flows based on the filled in parameters. | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089367213/Compute+design+flows | ||||
 | Select pipes | This action selects the pipes based on the filled in parameters and filtering criteria. | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089367328/Select+pipes |  | Optimise components | This action optimises the valves and pumpes. | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089367389/Optimize+pumps+and+valves |
 | Simulate | This action requires the use of components in the control library to simulate the dynamic behaviour of the system. | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089367697/Dynamic+simulation |
9. Canvas management, operations and model settings
Button logo | Name | Explanation | ||
|---|---|---|---|---|
 | Canvas selection and management | Canvas management & Floor plan implementation  | ||
Create report | https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089367755/Exports |  | Search | Can be used to search for components in your model. |
 | Operations | Gives a screen of different operations you can use and the shortcuts for these operations. | ||
 | Model settings | This lets you change the units, diversity standard and many more settings of your current model. |
...
Button logo | Name | Explanation |
|---|---|---|
 | User settings | Lets you change user-specific settings. |
 | Help | Contains a link to the https://hysopt.atlassian.net/wiki/spaces/HRM/overview or lets you contact one of our Hysopt experts. |
11
...
To prevent the software from becoming too confusing, some buttons or parameters of base circuits are hidden behind layers. Perspectives are used to reveal these hidden layers.
...
Perspective logo
...
Name
...
Explanation
...
Simulation
...
Lets you change user simulation-specific parameters on base circuits. This layer is used to parameterise the dynamic behaviour of the installation.
...
Partial load analysis
...
.
...
Sensitivity Analysis
...
Lets you select certain base circuit settings that you want to change in the sensitivity analysis.
...
Drawing canvas
This is the space where you can draw your model. You can draw models by dragging and dropping base circuits on the canvas and connecting these by pipes and control lines.
12. Zoom in and zoom out
zoom in or out of the Hysopt BIM Syncer user interface