• In progress

    • Start Hysopt BIM Syncer and log in

    Owned by Kristof Smits
    Last updated: Jun 30, 2023 by Jens De Gendt (Unlicensed)
    2 min read

    1. Start Autodesk Revit application

       

    2. If following message appears, press “Always Load”

       

    3. Open a Revit project

       

    4. In the menu, go to the Hysopt BIM Syncer

       

    5. Open the P&ID window

       

    6. And log in with your Hysopt BIM Syncer credentials

    7. You will notice that most of the BIM Syncer functionality remains greyed out.


      To enable all functionality, link a Revit project with the Hysopt model.