...
When the model error is indicated on a basic circuit the circuit the respective base circuit is marked red. By hoovering hovering with the mouse cursor over the respective node or basic circuit, an explanation of the inconsistency or error/warning appears.
...
The node indicates a 'supply temperature mismatch'. In fact, physically Physically it's not feasible to supply the first branch with a supply temperature of 75°C and the second branch with a supply temperature of 40°C. Therefore you need to indicate on the right passive mixing that the primary supply temperature is 75°C.
...
Several base circuits and nodes indicate a 'power propagation mismatch'. This means that there is a an unrealistic value filled in insides inside the parameter box of the base circuit. This error can occur on in all the hybrid productions.
When using a parallel production, you can't fill in a power that is greater then than the total power needed for the installation. If you do, you'll get the error as shown above.
...