To facilitate Calculations, validation and synchronisation, you'll need to map Hysopt components and pipes to real-world 3D model Revit components and pipes. For example such as a P&ID radiator symbol with a Revit family radiator.
The mapping Assistant will guide you in :
creating new mappings manually
suggesting new mappings, based on classification and topology of components
walking through all mapped elements between the Hysopt model and the Revit model
Map manually
how to map a component?
Select a component in Hysopt, select a component in Revit, or vice versa. Map them.
how to map a zone/space?
Select a zone in Hysopt, select a space in Revit, or vice versa. Map them.
how to map pipes?
You can map all the pipesegments (pipes, fittings, …), but we advice to just map one pipesegment in Hysopt with one pipesegment in Revit, that’s enough for the BIM feeder.
Show suggestions
refresh
map
map all
navigate < >
Show Mappings
unmap
navigate < >
Advanced
automatically navigate to objects
Minimal suggestion probability
Highlight duration (in seconds)
- images
- only first element
- mem cache
- file cache
Following 4 minute video gives a short introduction on the Mapping Assistant functionality
how to map a group of elements, for example a BIM object that corresponds with multiple Hysopt elements?
Just multiselect all the components in Hysopt or Revit, e.g. like in following movie :