Meter boxes allow you to measure the complete electricity and/or fuel consumption & production over multiple base circuits, over multiple canvasses, and if desired over a full model.

Library

The electricty meterbox and fuel meterbox can be found in the Control library

Assigning production and consumption

From Base Circuits

You can assign any base circuit that produces or consumes electricity to an electricity meter.
You can assign any base circuit that produces or consumes fuel to a fuel meter.
Assigning of Base Circuits over multiple canvasses is also supported.
To assing (or unassign) a Base Circuit to a meter, follow next steps :

1. Click the assign (or unassign) button in the menu bar

2. Click on a Base Circuit, then click on the meter. Repeat for all Base Circuits that you want to assign.

Here you can see a short movie demonstrating the “assign“ and “unassign“ functionality.

From additional consumption and production data

If you like, you can add additional consumption or production data by using the additional control input parameters.

Data, graphs and excel export

After simulation, you can see the exported, imported, consumed and produced electricity/fuel.

Detailed info about the related Base Circuits is added into the transient graphs and the excel exports.