...
Most combinations are already available as a template in the inspiration library, for example like below, a cascade of boilers was required. By simply navigating to the inspiration library, clicking on the production units needed (in this case just boilers), and clicking insert, the template gets loaded into your model.
...
Boiler capacity
Water volume (by clicking the pencil icon next to boiler capacitance)
The KV-value through the boiler (this can be implemented as the pressure drop over the design flow by clicking the pencil icon)
The KVS value of the on/off valves
Insert pump curves
Set correct pipe diameters if known, otherwise, unlock them and Hysopt will calculate an approximation.
...
More information on different distribution options can be found here: Hybrid production Heating https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089204289
For the example, a parallel production was used, in which case the primary power percentage should be filled in. This value lets Hysopt know how to divide the design flow over the inlets. The exact value depends on the boilers installed and, if all boilers are the same size, is already filled in correctly in hysopt.
...