Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

Link Revit project and Hysopt model

The BIM Syncer is fully operational as soon as you “link“ a Revit project with a Hysopt model.

  1. In the P&ID window, open the Hysopt model that corresonds to the Revit Project that you opened in Revit

  2. Press the “link“ button to link the Revit project and the Hysopt model

  3. Hysopt BIM Syncer generates two popup messages to let you know that the Revit project is linked with the Hysopt model and the mapping is saved in the Revit file.

  4. Save the Revit project

As with all modifications that you do within a Revit project, the link will be persisted as soon as you explicitely save the changes to your Revit project

Unlink Revit project and Hysopt model

  1. Press the “unlink“ button to unlink the Revit project and the Hysopt model

  2. Confirm that you want to unlink. There is no possibility to undo this action.

  3. Save the revit project

Open linked Hysopt model

Press the “open linked Hysopt model” button to navigate back to the linked model in the Hysopt BIM Syncer view

  • No labels