How to export

After calculating all the components with "optimize pumps and valves" it is possible to export a installation report, see picture below.

What is an installation report

The installation report is intended for installation and commissioning, by labeling all of the base circuits the exported list (Excel) will be linked to the scheme. So for each label all of the calculated parameters are shown per base circuit (see example below).

For Example: Circuit A shows following calculated parameters

• Pump: pump head and volume flow
• Three-way control valve: Kvs-value and actual authority
• Balance valve on bypass: Kv-value
• Balance valve for pump: Kv-value, preset and volume flow
• Pipe size

You can view the following examples via this token: ODI4fE92QkY2TXY4

You can view the Excel via this Link:

Labelling

Labels are added through the layer "Text", the label is only connected to the base circuit if it is within following radius (see picture below). When there are 2 base circuits near a label it will take the closest one.