Gas absorption heat pump

Owned by Dennis De Beuckeleer
Last updated: Aug 30, 2023 by Ruben Gielen
1 min read

The Hysopt software determines the heat flow of the gas absorption heat pump using efficiency- and thermal power lookup tables. The data required for these tables can be found in the manufacturer's technical brochures.

The evaporator temperature is default connected to the ambient temperature in the simulation.

The procedure to make these tables is the same as for the normal heat pumps. This is explained on the following page: https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089204173/Heat+pump