Step 5: Design of alternatives
- Dennis De Beuckeleer
Owned by Dennis De Beuckeleer
Once the reference model is finished and load matched, the next step is to optimise the system. In this optimisation process, the following steps are recommended:
Each step is explained in detail in the subsections below.
Tip: We are now going to make changes to the reference model. Before editing the model, make sure you make a copy of the reference model by using the ‘Save as’ button.
Tip: After every optimisation and simulation, it is necessary to check if the load match is still accurate, and an inaccurate load match will lead to wrong conclusions.