Large water content (direct)

The templates consist of various configurations for large water content boilers.

Boiler - Large water content - Active mixing

Open

The boiler in this example is demand-controlled, more information on this control strategy can be found in https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089369014. Furthermore, the distribution circuits of every branch is an active mixing, which means no primary pump is needed. The boiler requires a large water content because the flow through the boiler is variable and in partial load, this can be nearly zero. Templates for boilers with small water content can be found in https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089369112 and https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089370409.

More information on boilers and distribution circuits can be found in and .

Boiler - Large water content - Passive mixing

Open

This template is similar to the previous template “Boiler - Large water content - Active mixing“, except for the passive mixing circuits instead of the active mixing circuits. Because a passive mixing circuit is used, a pump is needed. In this case, both boiler and pump can handle a nearly zero flow rate. If this is not the case, templates with minimum flow protection can be found in .

More information on boilers and distribution circuits can be found in and .

Boiler - Large water content - Variable flow

This template is similar to the previous template “Boiler - Large water content - Passive mixing“, except for the throttle valves instead of the passive mixing circuits. Throttle valves cant be controlled to change the supply temperature, but control the flow rate. In this case, both boiler and pump can handle a nearly zero flow rate. If this is not the case, templates with minimum flow protection can be found in .

More information on boilers and distribution circuits can be found in and .