Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Current »



Control generator

NameDescription

ConstantThis BC generates a constant value during a dynamic simulation. Default value is 75

External temperature

This BC generates a external temperature during a dynamic simulation


Heating curve

The heating curve gives a supply temperature according to the external temperature.

All points on the heating curve are fully customizable.

Heating curve with displacement

When using a standard heating curve there is no feedback from the rooms, so the room temperature maintains 20°C. The heating curve with displacement uses a temperature measurement in a reference room to adjust the heating curve so the supply temperature rises.

All points on the heating curve and the displacement-to-error ratio are fully customizable.


Ramp

This BC generates a ramp depending on the data that is entered.

Setpoint generator

This BC generates a square wave depending on the data that is entered.

Sine wave

This BC generates a sinus wave depending on the data that is entered.

Time

This BC generates the simulation time during a dynamic simulation. For example if you simulate for 2 days, a linear graph will be generated from 0h to 48h.

Eco design tap profile generator


Standard tap profile generator


  • No labels