You can view the following examples via this token: Mjg5fElLQnhtMWJa
Notice that the direction of the red or yellow arrows indicate the direction of the energy flow.
Parallel production
With the parallel production you can configure multiple productions that work simultaneous in one system.
The only parameter that needs to be filled in on the parallel production is the "Heat Flow on the primary circuit".
On the example below is an installation with an equivalent radiator capacity of 200 kW, on the parallel production you can indicate how much power goes to each boiler. There are two boilers one of 80 kW and another one of 120 kW.
The boiler of 120 kW is connected to the primary circuit of the parallel production therefore you need to fill in 120 kW on parallel production for the primary circuit.
Switched production
With the switched parallel production you can configure multiple productions that work individually in one system.
For example: if you have a back-up boiler which is used when the heatpump is no longer sufficient.
On the switched production you need to set the production regime and power coming from the yellow arrow.
