Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

  1. Start Revit

  2. If following message appears, press “Always Load”

  3. Open a Revit file or Revit project

  4. In the menu, go to the Hysopt BIM Syncer

  5. Open the P&ID window

  6. And log in with your Hysopt credentials

  7. You’ll notice that most of the BIM Feeder functionality remains greyed out.

    To enable all functionality, link a Hysopt model with the Revit model.
    For more info, see Link (a Hysopt model with a Revit model)

  • No labels