| Info |
|---|
The goal of this exercise is to become familiar with HVAC optimization workflows in the Hysopt software. Are you new to Hysopt? Don't worry, this guide provides clear, step-by-step instructions to complete the exercise successfully. The necessary models to start the exercise are pre-made and can be found in the Project folder on your company’s Hysopt account. |
...
Make your own personal folder in the Trial License Exercise folder which is located in the Project folder.
Go to the Project folder to find the trial license exercise.
...
| Info |
|---|
Getting the complete radiator circuits in the model is very important from a more technical point of view. As the calculation of correct pump heads and hydraulic balancing is critical to achieve thermal comfort in every room of the building. This step is however is more appropriate to be done in the Hysopt Calculator in a later phase of the project. |
...
Click on the first sensor after the boiler low loss header. On every sensor a lot of parameters can be visualized after the simulation.
...
As can be seen from the figure above the volume flow on the secondary side of the open header is almost constant. When changing visualized parameter from volume flow to supply temperature we can see some transient supply temperature behavior appear in the system.
There are multiple reasons for this behavior:
...