...
COP and power table: The table that the Hysopt software uses to determine the heat flow based on the reference heating power , the reference temperatures and the modulation signal.
Reference source exchanger temperature: The reference temperature at the source exchanger (evaporator) for which the polyvalent four-pipe heat pump pump’s reference heating power is defined in heat pump mode.
Reference heating coil temperature: The reference temperature at the heating coil (condenser) for which the polyvalent four-pipe heat pump pump’s reference heating power is defined in heat pump mode.
...
The parametrisation for the Chiller mode and THR mode follow the same logic, but make use of respectively an EER-table and TER-table. More information on the application of these tables can be found at https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089204173/Heat+pump.
Design calculations
The design calculations for the polyvalent four-pipe heat pumps are similar to the ones used for the reversible heat pumps. An in-depth tutorial can be found here: https://hysopt.atlassian.net/wiki/spaces/HRM/pages/3433594881/Reversible+heat+pump#Impact-of-the-design-configuration-on-the-calculated-heat-pump-size.
This part of the wiki page is still in progress and will be elaborated expanded soon.