The operators compare different inputs and make calculations based upon them.
Control generator | Name | Description |
|---|---|---|
 | Activator | This BC creates a 1 or 0 based on the relevant input signal. |
It can be used as a 2-point measuring control strategy for a thermal store. | ||
 | Comparison | This BC creates a 1 if the input in A is larger than B and a 0 if B is larger than A. |
 | Difference | This BC is a simple mathematical difference between A and B. |
 |
Hysteresis and integrator |
This BC uses a |
hysteresis or integrator function on the input signal. | ||
 | Minimum & Maximum | This BC gives |
either the minimum or the maximum of all the signals connected on the input. | ||
 | Multiply | This BC multiplies all the input signals connected. |
 | Negative | This BC makes the signal negative. |
 | Piecewise |
linear function & function expression |
This BC uses functions on the input signal, which can be changed to fit the needs of the project. | ||
 | Scaling and truncating | This BC allows for scaling of values. |
 | Sum | This base circuits sums all the inputs together. |
 | Low pass circuit | The Low pass circuit puts a time delay on a value change. |
 | Delay | This |
BC puts a delay on the signal. This can be used to let a pump run 5 minutes longer for example. |
 | Loop Back | This BC is necessary if you want to loop a signal back (in the next timestep) |
 |