Operating principle
The passive mixing circuit controls the net thermal power passing through the circuit by mixing cold return water (coming from the end unit return pipes) with hot water from the primary production side. In full load operation the 2-way valve is completely opened whereas in partial load conditions the 2-way valves is positioned in function of the process value (measured water temperature) and set point (heating curve). A primary pump is necesarry to achieve flow through the 2-way valve.
Individual components and parameters
- Secondary pump
- 2-way valve
- Balance valve for pump
- Balance valve for primary balancing
System check
As this mixing circuit is a so called 'passive' circuit, the circuit needs a primary pump to extract hot water from the primary side. If the software encounters a missing pump on the primary side of the passive mixing circuit, it will report this as a problem while running the system check.
Related models:
- TOKEN - NjQwfG9mUEF2bzla - Passive circuit without primary pump
Design flow and temperature regime propagation
...