...
The mapping assistant has 3 modes, information bar and an advanced section:
Map manually
In the mode Map manually, you can map component, pipes and zones manually. You do this by selecting elements in the Hysopt BIM Syncer canvas and a Revit view.
...
nr number: how many elements of the same kind are present
ID identifier: the unique identifier of the element
Hysopt ID: an Hysopt ID is unique identifier for a Hysopt element
C#: canvas number
B#: basecircuit number
Z#: zone number
Revit element ID: Is a decimal number (int) that identifies an element in a Revit project. It is unique in that same project, but not among several models. Its length may vary depending on the number of elements in a model, but rarely exceeds 8 digits. (more information on selecting Revit elements by ID https://help.autodesk.com/view/RVTLT/2024/ENU/?guid=GUID-2B1CC22C-CB1F-45DA-B57B-62C36013D9E0 )
Type: type of the element (such as pipe, zone, or component)
Pipe
Zone
Component
Location: where is the element located
Supply: element is located in the hydronic supply
Return: element is located in the hydronic return
Both: element is connected to the hydronic supply and return
External: element is not connected to the hydronic system
Unknown: location of the element is unknown
Family: name of theRevit family
Show suggestions
...