...

1. On/off control

...

Working principle

The heat pump is an air source heat pump, which means the evaporator side extracts the heat from the ambient air.

...

A PI-controller (with a blue minus icon) will make sure the minimal return temperature required, 30°C in this case, is met by controlling the 3-way modulation valve.

Notices/Remarks

• The user should lock the nominal thermal power and temperatures of the HP. If not, the software will calculate with the propagated power and return temperature from the installation.

...

More information about the HP can be found in Heat pump.

Ground Source Heat Pump (GSHP)

...

variation

...

Idem as Similar to the previous template, except this is a Ground Source Heat Pump (GSHP) instead of an Air Source Heat Pump (ASHP). The difference is specified in Heat pump.